FREE SHIPPING ON ORDERS OVER $39.95

Want to buy in bulk give us a call 800-427-5819 or email csr@baitplastics.com 

We also ship international Please contact us for more information.

{Lower 48 States Only}

Hawaii or Alaska Please contact us for more information.

See our new 142/242 Low Odor/Ultra Clear series!

Bait Plastics, LLC

Air Clamp/Vise

Pneumatic Air Vise Clamp

$280.99

Compress Air System is used for 6″, 8″, and 10″ Aluminum Bait Plastics Molds. Aluminum Twin Rails – 24″ L x 4″W x 1/2″ H; Heavy Duty Construction Air Cylinder 2.8″L x 2.4″W x 3.4″ H’ 50mm Stroke Double Action. Double Piston Rod-external diameter:” 20mm/0.79″ Inlet/Out thread diameter:12.5mm/1/2″ Working pressure range: 30-116psi, recommended 100psi Warning […]

Aluminum Fishing Lure Molds

Epic Bait Molds 2.5″ Ned Craw

The ned craw bait measures 2.5″ from tail to tip of claws.  Featuring 3D claws, short ned rig style body, 6 legs, and small antenna. 4 cavity

Aluminum Fishing Lure Molds

Epic Bait Molds 3″ Epic Prey Bait

$159.99

The 3 Inch Epic PreyBait, “hand injection” style mold was designed as part of a collaboration with Marling Baits. The Epic PreyBait is a boot tail swimbait with a rear fin designed to have an intense action with realistic presentation at any speed, with a kick and wobble on the fall. This bait/mold does not have a hook slot and is intended to […]

$224.99

The 4″ long Slick Swimmer paddle tail swimbait’s body is .6″ thick and .375″ wide. This is a 6 cavity “top shot” mold which allows you to use two injectors and a mixing block (not included) to shoot top/bottom laminated baits.

Aluminum Fishing Lure Molds

Epic Bait Molds 7″ Curly Tail Grub

$119.99

This 7 Inch ribbed Curly Tail Grub’s body thickness is .65″, the body length from nose to base of tail is 2.45″ and the curly tail is .07″ thick. The total length of this bait with its tail extended is 7 inches. 2 Cavity  

Aluminum Fishing Lure Molds

Epic Bait Molds 18″ Mega Ribbon Tail

$144.99

At a full 18″ the Mega Ribbon is the one of the biggest (if not THE biggest) Ribbon Tail injection worm mold on the market! Featuring a 1/2″ diameter ribbed body, smooth section, and .08″ thick tail. The ribbed body / smooth area is 7.5″ long and the tail is 10.5″ long making for a grand total of […]

Aluminum Fishing Lure Molds

Epic Bait Molds 2.5″ New craw

$189.99

The ned craw bait measures 2.5″ from tail to tip of claws.  Featuring 3D claws, short ned rig style body, 6 legs, and small antenna. 4 Cavity

Quality supplier for all Soft Bait Making products.

Bait Plastics offers soft bait supplies for the DIY lure maker.  We ship Plastisol, Pigments, Glitters, Scents, and a full range of Plastisol additives.

Melting Pots

Mixing Melting Pot

$300.00$350.99

Mixing Melting Pot Mixer attached, mixes while heating, Master heat control regulates the desired cooking temperature automatically. Kit Includes: 6 Quart, 8 Quart, or 10 Quart Pot Mixer Lid ASSM Power Cord Mixer Custom stand offs with high temp washers.

Safety Products

Pail Opener

$9.99

Blue Orange

Bait Plastics Accessories

The Chill-N-Reel

$12.95

The Chill-N-Reel Lets you go fishing without putting your drink down! It's a hand-line fishing reel on the side of an insulated drink holder. The Chill-N-Reel is easy to just about any age. Simply pitch the line(with bait on the hook)in the water with the logo-side facing away from you and your favorite beverage in the drink insulator, wait, tug when you get a bite, and hand-reel with your fish on! It's that easy! The patented The Chill-N-Reel drink holder comes equipped with 50ft of 8lb test line, a hook, sinker, and of course a Chill-N-Reel drink insulator to keep your beverage of choice nice and cool so you can "Reel 'em in Cold!"

Aluminum Fishing Lure Molds

Epic Bait Molds 7″ Curly Tail Grub

$119.99

This 7 Inch ribbed Curly Tail Grub’s body thickness is .65″, the body length from nose to base of tail is 2.45″ and the curly tail is .07″ thick. The total length of this bait with its tail extended is 7 inches. 2 Cavity  

$7.99$23.99

High Temp Polyester Glitter .015 HEX  

Hand Injectors

Injector #2

$89.99$129.99

Hand Injectors with screw on tip.   4 Ounce Injector = $89.99 6 Ounce Injector = $99.99 10 Ounce Injector = $119.99 12 Ounce Injector = $129.99

UV Powder

UV Powder

$9.99$64.99

UV Powders - Add UV Powder to your plastisol to create UV reactive baits!

Thank your for your purchase from Bait Plastics. Below are some instructions and helpful tips. Lure Plastisol Formulations – Bait Plastics offers the below formulations for you exact needs. 112 Super Soft – This formula is great for drop shot and finesse baits. This is our softest formula and guarantees great action in the water. […]

Aluminum Fishing Lure Molds

5 Inch Stick Bait Mold – Exclusive!

$129.99

5 Inch Stick Bait Mold - Exclusive 5 Cavity Mold    

Aluminum Fishing Lure Molds

3 Inch Curly Tail Grub

$129.99

3 Inch Curly Tail Grub 4 Cavity  

We love the opportunity to speak with our customers and can be reached

at 800-427-5819 or sales@baitplastics.com

Wanting to learn more about Bait Plastics formulas and making your own soft baits.  Click here for helpful tips! 

Feature Products

Scent

Scents

$8.19$153.98

The best scents on the market.  Add these scents to the finished baits or bag to attract your trophy fish!

  • Anise
  • Cappuccino
  • Crawfish Oil
  • Garlic
  • Herring

Plastisol Additives

UV Dipping Dye

$6.95

4 Ounce Dipping Dye with UV. Instantly change your baits color  

  • UV Clear
  • Green
  • Chartreuse
  • Orange
  • Red

Bag Size

Bait Bags

$4.95$19.99

Hanging Bait Bags - Laminated 3 x 3 4 x 4 5 x 3 6 x 4 7 x 4.25 8 x 5 9 x 4 12 x 4