See our new 142/242 Low Odor/Ultra Clear series!

Bait Plastics, LLC

$115.99$429.99

Hand Injectors with Locking Pins. 2" diameter injectors 8oz Injector  = $155.99 12oz Injector=$169.99 16oz Injector = $175.99 20oz Injector = $185.99 Dual Kit only = $115.99 Dual 8oz Injector = $369.99.99 Dual 12oz injector = $389.99 includes 2 injectors and kit Dual 16oz injector=$409.99 includes 2 injectors and kit Dual 20oz injector=$429.99 includes 2 injectors and kit All injectors Comes with 2 O-Rings

Air Clamp/Vise

Air Clamp

$350.00

-Fully Machined clamp plates to ensure optimized clamping face. -6" wide base with 8" clamping plates to allow for mold stability and greater clamping surface. -Adjustable height for different mold sizes. -Anti Marring plates to help reduce cosmetic wear of mold surfaces. -Adjustable speed controller to optimize cylinder speed to operator preference. -110-140 psi recommended for operation. -Inline filter recommended to extend the life of the cylinders. -Keep molds centered to get optimal clamping pressure. -Remove air pressure from clamp after each use. -Usage of the clamp can pinch hand, finger or ect. Using this clamp the operator/owner of the clamp takes full responsibility of usage of the device. -Clean with compressed air and WD-40 only. -Do not exceed 140 psi. -Lubricate system with 1 drop of pneumatic tool oil per week of use. ***Frequent use may require more frequent lubrication. ***LUBRICATE WITH PNEUMATIC TOOL OIL ONLY***

Aluminum Fishing Lure Molds

4.20″ Beaver

$74.99

4.2" Original Beaver

Original beaver mold, hard to beat a tried and true fish catcher. Single Cavity by Kearby Design & Manufacturing LLC Made in USA

Aluminum Fishing Lure Molds

3.5″ Craw

$74.99

3.5" craw comes  standard with legs. Single Cavity by Kearby Design & Manufacturing LLC Made in USA

Aluminum Fishing Lure Molds

4.65″ Hawg

$74.99

4.65" Hog mold Single Cavity

The smaller hog at 4.65" long with our style of flappers for excellent action! by Kearby Design & Manufacturing LLC Made in USA

Aluminum Fishing Lure Molds

3.5″ Speedy Craw

$74.99

3.5" Speedy Craw Single Cavity

Aluminum Fishing Lure Molds

4″ Bug Mold

$70.00

4" Long bug, excellent action in the water. The body of this bait and nose is thicker to give the bait more durability than similar baits.   Single Cavity

Aluminum Fishing Lure Molds

4″ Bug

$725.00

4" Long bug, excellent action in the water. The body of this bait and nose is thicker to give the bait more durability than similiar baits. 16 Cavity Made in USA

Quality supplier for all Soft Bait Making products.

Bait Plastics offers soft bait supplies for the DIY lure maker.  We ship Plastisol, Pigments, Glitters, Scents, and a full range of Plastisol additives.

$99.99$249.99

High Quality, High Strength TIN CURE RTV Silicone POLYSOL's RTV silicone mold making rubber is a two-component material.   There is a Part A and a Part B that is mixed together at a 10/1 ratio APPLICATIONS: -
  • Soft baits / Lures {Plastisol}
  • Wax
  • Soap
  • UltraCal 30
  • EpoxyLow melt metals (up to 400 degrees Max)
  • Polyester
  • Fiberglass Resign
  • Plaster
  • Urethane Rubber & Plastic
  • HydroCal White
MIXING: Mix Part A and Part B at a 10/1 ratio.  Once the two components are mixed thoroughly you will have roughly 45 minutes to pour the mixture. CURING:  After the mixture is poured it will fully cure in 12 Hours. PROPERTIES Mix Ratio: 10/1 by weight Base Color - Beige Catalyst Color - Blue Specific Gravity - 1.07 Viscosity (cPs) - 16,000 Pot Life (pour time) - 45 min. Tensile - 600 Elongation, % -  160 Durometer, Shore A = 45/50 Tear Strength - 25 Materials Recommended:
  • Digital Gram or Digital Postage Scale
  • Mixing Containers
  • Stir Sticks
  • Latex or Nitrile Gloves

$4.95$19.99

Hanging Bait Bags - Laminated 3 x 3 4 x 4 5 x 3 6 x 4 7 x 4.25 8 x 5 9 x 4 12 x 4

Liquid Plastisol

The Plastisol Sampler

$24.99

 

  • 112 Super Soft142 Super Soft/Low Odor/Ultra Clear152 Soft 212 Medium 242 Medium/Low Odor/Ultra Clear 262 Medium / Hard
  • 292 Medium/ Hard low odor/ultra clear
  •   312 Saltwater 342 Hard/Low Odor/UltraClear 362 Super Tough

Sale!

Flex X

Flex X 200

$75.99

Years in the making patent pending from Bait Plastics. This unique blend of proprietary ingredients is both non phthalate and non PVC. Not intended for microwave.  Set temperature 400F. Best processed using a convection pan, presto pot with beaker, shooting star, or a hot pan. if not using mixing pot, keep stirring to prevent burning or over heat. Mix until water clear and free of air bubbles. Comes with 1lb of Salt Works with all standard injectors and molds. Approximately 6lbs per 1 gallon container. Super clear, stretchy, low odor, and glossy. Much more durable than stand pvc plastics. See video below!!!  

Aluminum Fishing Lure Molds

4.65″ Hawg

$74.99

4.65" Hog mold Single Cavity

The smaller hog at 4.65" long with our style of flappers for excellent action! by Kearby Design & Manufacturing LLC Made in USA

$140.00

The 6 Inch Finesse Worm is 6 inches total length with a diameter of .33″ at the thickest part of the body.  The bottom of the bait is flat in overall shape but the ribbing on the body goes all the way around the worm. Mold size – 3″x7″ Number of cavities – 5 All molds are […]

Sale!
$45.98

 

  • 112 Super Soft
  • 142 Super Soft/Low Odor/Ultra Clear
  • 152 Soft
  • 212 Medium
  • 242 Medium/Low Odor/Ultra Clear
  • 262 Medium / Saltwater
  • 292 medium/hard/low odor/ulra clear
  • 312 Saltwater
  • 342 Hard Saltwater/ Low Odor/Ultra Clear
  • 362 Saltwater Super Tough
 

$4.99

Color Wheel For mixing different colors. Find your specific color by using this simple color wheel guide.

Aluminum Fishing Lure Molds

4″ Bug

$725.00

4" Long bug, excellent action in the water. The body of this bait and nose is thicker to give the bait more durability than similiar baits. 16 Cavity Made in USA

$415.00

5.25" Stick bait very similiar to the big brand stick bait of this size. 18 Cavities Made in USA  

$5.95$9.95

Pearl Powder - Add Pearl Powder to hot plastisol to create unique effects and light reflection. 1 Fluid ounce container 2 Fluid Ounce container

  • Silk Silver New
  • Black Pearl
  • Pink Pearl
  • Dark Blue Pearl
  • Sky Blue Pearl
  • Copper Pearl
  • Dark Red Pearl
  • Brilliant Gold
  • Green Apple Pearl
  • Purple Pearl
  • Dark Green Pearl
  • Silver Pearl
  • White Pearl

Aluminum Fishing Lure Molds

Epic Bait Molds 2.5″ Ned Craw

$160.00

The ned craw bait measures 2.5″ from tail to tip of claws.  Featuring 3D claws, short ned rig style body, 6 legs, and small antenna. 4 cavity

We love the opportunity to speak with our customers and can be reached

at 800-427-5819 or csr@baitplastics.com

Wanting to learn more about Bait Plastics formulas and making your own soft baits.  Click here for helpful tips! 

Feature Products

Scent

Scents

$9.99$177.99

The best scents on the market.  Add these scents to the finished baits or bag to attract your trophy fish!

  • Anise
  • Cappuccino
  • Crawfish Oil
  • Garlic
  • Herring

Plastisol Additives

UV Dipping Dye

$6.95

4 Ounce Dipping Dye with UV. Instantly change your baits color  

  • UV Clear
  • Green
  • Chartreuse
  • Orange
  • Red

$4.95$19.99

Hanging Bait Bags - Laminated 3 x 3 4 x 4 5 x 3 6 x 4 7 x 4.25 8 x 5 9 x 4 12 x 4