See our new 142/242 Low Odor/Ultra Clear series!

Bait Plastics, LLC

$115.99$429.99

Hand Injectors with Locking Pins. 2" diameter injectors 8oz Injector  = $155.99 12oz Injector=$169.99 16oz Injector = $175.99 20oz Injector = $185.99 Dual Kit only = $115.99 Dual 8oz Injector = $369.99.99 Dual 12oz injector = $389.99 includes 2 injectors and kit Dual 16oz injector=$409.99 includes 2 injectors and kit Dual 20oz injector=$429.99 includes 2 injectors and kit All injectors Comes with 2 O-Rings

Air Clamp/Vise

Air Clamp

$350.00

-Fully Machined clamp plates to ensure optimized clamping face. -6" wide base with 8" clamping plates to allow for mold stability and greater clamping surface. -Adjustable height for different mold sizes. -Anti Marring plates to help reduce cosmetic wear of mold surfaces. -Adjustable speed controller to optimize cylinder speed to operator preference. -110-140 psi recommended for operation. -Inline filter recommended to extend the life of the cylinders. -Keep molds centered to get optimal clamping pressure. -Remove air pressure from clamp after each use. -Usage of the clamp can pinch hand, finger or ect. Using this clamp the operator/owner of the clamp takes full responsibility of usage of the device. -Clean with compressed air and WD-40 only. -Do not exceed 140 psi. -Lubricate system with 1 drop of pneumatic tool oil per week of use. ***Frequent use may require more frequent lubrication. ***LUBRICATE WITH PNEUMATIC TOOL OIL ONLY***

Aluminum Fishing Lure Molds

4.20″ Beaver

$74.99

4.2" Original Beaver

Original beaver mold, hard to beat a tried and true fish catcher. Single Cavity by Kearby Design & Manufacturing LLC Made in USA

Aluminum Fishing Lure Molds

3.5″ Craw

$74.99

3.5" craw comes  standard with legs. Single Cavity by Kearby Design & Manufacturing LLC Made in USA

Aluminum Fishing Lure Molds

4.65″ Hawg

$74.99

4.65" Hog mold Single Cavity

The smaller hog at 4.65" long with our style of flappers for excellent action! by Kearby Design & Manufacturing LLC Made in USA

Aluminum Fishing Lure Molds

3.5″ Speedy Craw

$74.99

3.5" Speedy Craw Single Cavity

Aluminum Fishing Lure Molds

4″ Bug Mold

$70.00

4" Long bug, excellent action in the water. The body of this bait and nose is thicker to give the bait more durability than similar baits.   Single Cavity

Aluminum Fishing Lure Molds

4″ Bug

$725.00

4" Long bug, excellent action in the water. The body of this bait and nose is thicker to give the bait more durability than similiar baits. 16 Cavity Made in USA

Quality supplier for all Soft Bait Making products.

Bait Plastics offers soft bait supplies for the DIY lure maker.  We ship Plastisol, Pigments, Glitters, Scents, and a full range of Plastisol additives.

$140.00

The 4.6″ Freakin Frog is a top water frog bait.  It’s legs kick/flop to create a small splash of water and a bubble trail as it is retrieved on a slow/moderate to fast retrieve.  The body of this bait is .85″ wide and .52″ thick.  The body also features a life-like profile with bumps down the […]

$5.95$9.95

Pearl Powder - Add Pearl Powder to hot plastisol to create unique effects and light reflection. 1 Fluid ounce container 2 Fluid Ounce container

  • Silk Silver New
  • Black Pearl
  • Pink Pearl
  • Dark Blue Pearl
  • Sky Blue Pearl
  • Copper Pearl
  • Dark Red Pearl
  • Brilliant Gold
  • Green Apple Pearl
  • Purple Pearl
  • Dark Green Pearl
  • Silver Pearl
  • White Pearl

$190.00

The 3″ slick swimmer paddle tail swimbait’s  body is just under .5″ thick and .375″ wide. The bait has a big side to side tail wobble with body roll at slow speeds and ultra fast, hard kicking action at higher speeds. This is a 6 cavity “top shot” mold which allows you to use two injectors […]

$4.95$19.99

Hanging Bait Bags - Laminated 3 x 3 4 x 4 5 x 3 6 x 4 7 x 4.25 8 x 5 9 x 4 12 x 4

$7.99$23.99

High Temp Polyester Glitter .040 HEX

Aluminum Fishing Lure Molds

Epic Bait Molds 3.25″ Ned Leech

$220.00

The Ned Leech measures 3.25″ from end to end.  The thickest part of the body is .8″ wide and .375″ thick and the thin section of the tail is .25″ wide and .1″ thick.  The body has a thin ribbed texture to mimic a real leech, and the thin tail with bulbous tip provides action even when […]

Sale!
$159.99

 

  • 112 Super Soft
  • 142 Super Soft/Low Odor/Ultra Clear
  • 152 Soft
  • 212 Medium
  • 242 Medium/Low Odor/Ultra Clear
  • 262 Medium / Saltwater
  • 292 medium/hard/low odor/ulra clear
  • 312 Saltwater
  • 342 Hard/Low Odor/UltraClear
  • 362 Saltwater Super Tough

Aluminum Fishing Lure Molds

4″ Bug

$725.00

4" Long bug, excellent action in the water. The body of this bait and nose is thicker to give the bait more durability than similiar baits. 16 Cavity Made in USA

$145.00

The 5 Inch Flappin Drax bait has a total length of 5 inches, body width of .8″ (including ribs), and body thickness of .46″ (including ribs).  There are a total of 10 ribs along the body and the last two near the tail of the bait are recessed (slightly indented) to accommodate the hook point. The bait is also […]

Aluminum Fishing Lure Molds

Epic Bait Molds 18″ Mega Ribbon Tail

$144.99

At a full 18″ the Mega Ribbon is the one of the biggest (if not THE biggest) Ribbon Tail injection worm mold on the market! Featuring a 1/2″ diameter ribbed body, smooth section, and .08″ thick tail. The ribbed body / smooth area is 7.5″ long and the tail is 10.5″ long making for a grand total of […]

Sale!
$144.99

 

  • 112 Super Soft
  • 142 Super Soft/Low Odor/Ultra Clear
  • 152 Soft
  • 212 Medium
  • 242 Medium/Low Odor/Ultra Clear
  • 262 Medium / Saltwater
  • 292 medium/hard/low odor/ulra clear
  • 312 Saltwater
  • 342 Hard/Low Odor/Ultra Clear
  • 362 Saltwater Super Tough

Sale!
$45.98

 

  • 112 Super Soft
  • 142 Super Soft/Low Odor/Ultra Clear
  • 152 Soft
  • 212 Medium
  • 242 Medium/Low Odor/Ultra Clear
  • 262 Medium / Saltwater
  • 292 medium/hard/low odor/ulra clear
  • 312 Saltwater
  • 342 Hard Saltwater/ Low Odor/Ultra Clear
  • 362 Saltwater Super Tough
 

We love the opportunity to speak with our customers and can be reached

at 800-427-5819 or csr@baitplastics.com

Wanting to learn more about Bait Plastics formulas and making your own soft baits.  Click here for helpful tips! 

Feature Products

Scent

Scents

$9.99$177.99

The best scents on the market.  Add these scents to the finished baits or bag to attract your trophy fish!

  • Anise
  • Cappuccino
  • Crawfish Oil
  • Garlic
  • Herring

Plastisol Additives

UV Dipping Dye

$6.95

4 Ounce Dipping Dye with UV. Instantly change your baits color  

  • UV Clear
  • Green
  • Chartreuse
  • Orange
  • Red

$4.95$19.99

Hanging Bait Bags - Laminated 3 x 3 4 x 4 5 x 3 6 x 4 7 x 4.25 8 x 5 9 x 4 12 x 4