Want to buy in bulk give us a call 800-427-5819 or email 

We also ship international Please contact us for more information.

{Lower 48 States Only}

Hawaii or Alaska Please contact us for more information.

See our new 142/242 Low Odor/Ultra Clear series!

Bait Plastics, LLC

Air Clamp/Vise

Pneumatic Air Vise Clamp


Compress Air System is used for 6″, 8″, and 10″ Aluminum Bait Plastics Molds. Aluminum Twin Rails – 24″ L x 4″W x 1/2″ H; Heavy Duty Construction Air Cylinder 2.8″L x 2.4″W x 3.4″ H’ 50mm Stroke Double Action. Double Piston Rod-external diameter:” 20mm/0.79″ Inlet/Out thread diameter:12.5mm/1/2″ Working pressure range: 30-116psi, recommended 100psi Warning […]

Aluminum Fishing Lure Molds

Epic Bait Molds 2.5″ Ned Craw

The ned craw bait measures 2.5″ from tail to tip of claws.  Featuring 3D claws, short ned rig style body, 6 legs, and small antenna. 4 cavity

Aluminum Fishing Lure Molds

Epic Bait Molds 3″ Epic Prey Bait


The 3 Inch Epic PreyBait, “hand injection” style mold was designed as part of a collaboration with Marling Baits. The Epic PreyBait is a boot tail swimbait with a rear fin designed to have an intense action with realistic presentation at any speed, with a kick and wobble on the fall. This bait/mold does not have a hook slot and is intended to […]


The 4″ long Slick Swimmer paddle tail swimbait’s body is .6″ thick and .375″ wide. This is a 6 cavity “top shot” mold which allows you to use two injectors and a mixing block (not included) to shoot top/bottom laminated baits.

Aluminum Fishing Lure Molds

Epic Bait Molds 7″ Curly Tail Grub


This 7 Inch ribbed Curly Tail Grub’s body thickness is .65″, the body length from nose to base of tail is 2.45″ and the curly tail is .07″ thick. The total length of this bait with its tail extended is 7 inches. 2 Cavity  

Aluminum Fishing Lure Molds

Epic Bait Molds 18″ Mega Ribbon Tail


At a full 18″ the Mega Ribbon is the one of the biggest (if not THE biggest) Ribbon Tail injection worm mold on the market! Featuring a 1/2″ diameter ribbed body, smooth section, and .08″ thick tail. The ribbed body / smooth area is 7.5″ long and the tail is 10.5″ long making for a grand total of […]

Aluminum Fishing Lure Molds

Epic Bait Molds 2.5″ New craw


The ned craw bait measures 2.5″ from tail to tip of claws.  Featuring 3D claws, short ned rig style body, 6 legs, and small antenna. 4 Cavity

Quality supplier for all Soft Bait Making products.

Bait Plastics offers soft bait supplies for the DIY lure maker.  We ship Plastisol, Pigments, Glitters, Scents, and a full range of Plastisol additives.


Package Includes: 3 Gallon Vacuum Chamber 3/4" Acrylic Lid Heat Treated Silicone Lid Gasket Glycerin Filled Gauge with Brass Fittings 50 Micron Air Filter Non-Stick Silicone Pad Foot Steel Wire Collapse-Proof Hose 3 CFM Single Stage Vacuum Pump  Vacuum Pump Oil Instruction Manual


High Temp Polyester Glitter .015 HEX  


Safety Products

Spice Spoon


  • Stainless Steel
  • Set of four
  • Smidgen
  • Dash
  • Pinch
  • Tad


High Quality, High Strength TIN CURE RTV Silicone POLYSOL's RTV silicone mold making rubber is a two-component material.   There is a Part A and a Part B that is mixed together at a 10/1 ratio APPLICATIONS: -
  • Soft baits / Lures {Plastisol}
  • Wax
  • Soap
  • UltraCal 30
  • EpoxyLow melt metals (up to 400 degrees Max)
  • Polyester
  • Fiberglass Resign
  • Plaster
  • Urethane Rubber & Plastic
  • HydroCal White
MIXING: Mix Part A and Part B at a 10/1 ratio.  Once the two components are mixed thoroughly you will have roughly 45 minutes to pour the mixture. CURING:  After the mixture is poured it will fully cure in 12 Hours. PROPERTIES Mix Ratio: 10/1 by weight Base Color - Beige Catalyst Color - Blue Specific Gravity - 1.07 Viscosity (cPs) - 16,000 Pot Life (pour time) - 45 min. Tensile - 600 Elongation, % -  160 Durometer, Shore A = 45/50 Tear Strength - 25 Materials Recommended:
  • Digital Gram or Digital Postage Scale
  • Mixing Containers
  • Stir Sticks
  • Latex or Nitrile Gloves

Aluminum Fishing Lure Molds

6 Inch Trickworm


6 Inch Trickworm 5 Cavity



  • 112 Super Soft
  • 142 Super Soft/Low Odor/Ultra Clear
  • 152 Soft
  • 212 Medium
  • 242 Medium/Low Odor/Ultra Clear
  • 262 Medium / Saltwater
  • 312 Saltwater
  • 362 Saltwater Super Tough

Safety Products

Hot Mill Gloves


Hot Mill Gloves

Plastisol Additives

Floating Additive


Floating Additive is used to give baits increased buoyancy {Float}.  Please note that overuse of flotation beads will effect bait color.

Plastisol Additives

Heat Stabilizer


The Plastisol made by PolySol and distributed by Bait Plastics typically does not require any additional stabilizer, but this high grade stabilizer will correct any yellowing issues you may see after several reheats.

Safety Products





Highlight Powder - Add to plastisol to create unique effects and light reflection, Color will vary dramatically with plastic color. Use in clear or colored plastic. Packed by fluid ounces.

  • Blue Highlight
  • Violet Highlight
  • Gold Highlight
  • Green Highlight
  • Red Highlight
  • Copper Highlight

Aluminum Fishing Lure Molds

Epic Bait Molds 2.5″ New craw


The ned craw bait measures 2.5″ from tail to tip of claws.  Featuring 3D claws, short ned rig style body, 6 legs, and small antenna. 4 Cavity

We love the opportunity to speak with our customers and can be reached

at 800-427-5819 or

Wanting to learn more about Bait Plastics formulas and making your own soft baits.  Click here for helpful tips! 

Feature Products




The best scents on the market.  Add these scents to the finished baits or bag to attract your trophy fish!

  • Anise
  • Cappuccino
  • Crawfish Oil
  • Garlic
  • Herring

Plastisol Additives

UV Dipping Dye


4 Ounce Dipping Dye with UV. Instantly change your baits color  

  • UV Clear
  • Green
  • Chartreuse
  • Orange
  • Red

Bag Size

Bait Bags


Hanging Bait Bags - Laminated 3 x 3 4 x 4 5 x 3 6 x 4 7 x 4.25 8 x 5 9 x 4 12 x 4