-
×
Flex X 200 Sample
1 × $2.99
Subtotal: $2.99
See our new 142/242 Low Odor/Ultra Clear series!
Bait Plastics, LLC
Soft Bait Starter Kits
$139.99
Crappie Starter Kit 2 Gallons of Plastisol 112 212 Scent Garlic 4 Pigments Choices Flu Pink Monkey Milk Chartreuse Black 4 Color Choices of .015 Hex High Temp Glitter  Holo Gold Holo Silver Black Red 25 Bait Bags 3×3
Soft Bait Starter Kits
$135.99
Bass Starter kit 2 Gallons of Plastisol Pm212 PM262 Scent Garlic 4 Pigments Choices White Black Green Pumpkin Watermelon 4 Color Choices of .015 Hex High Temp Glitter  Black Red Royal Blue Purple 25 Bait Bags 7×4 1/4
Injectors
Price range: $115.99 through $429.99
Hand Injectors with Locking Pins. 2" diameter injectors 8oz Injector = $155.99 12oz Injector=$169.99 16oz Injector = $175.99 20oz Injector = $185.99 Dual Kit only = $115.99 Dual 8oz Injector = $369.99.99 Dual 12oz injector = $389.99 includes 2 injectors and kit Dual 16oz injector=$409.99 includes 2 injectors and kit Dual 20oz injector=$429.99 includes 2 injectors and kit All injectors Comes with 2 O-Rings
Air Clamp/Vise
$350.00
-Fully Machined clamp plates to ensure optimized clamping face. -6" wide base with 8" clamping plates to allow for mold stability and greater clamping surface. -Adjustable height for different mold sizes. -Anti Marring plates to help reduce cosmetic wear of mold surfaces. -Adjustable speed controller to optimize cylinder speed to operator preference. -110-140 psi recommended for operation. -Inline filter recommended to extend the life of the cylinders. -Keep molds centered to get optimal clamping pressure. -Remove air pressure from clamp after each use. -Usage of the clamp can pinch hand, finger or ect. Using this clamp the operator/owner of the clamp takes full responsibility of usage of the device. -Clean with compressed air and WD-40 only. -Do not exceed 140 psi. -Lubricate system with 1 drop of pneumatic tool oil per week of use. ***Frequent use may require more frequent lubrication. ***LUBRICATE WITH PNEUMATIC TOOL OIL ONLY***
Out of stock
Aluminum Fishing Lure Molds
$74.99
4.2" Original Beaver
Original beaver mold, hard to beat a tried and true fish catcher.
Single Cavity
by Kearby Design & Manufacturing LLC
Made in USA
Out of stock
Aluminum Fishing Lure Molds
$74.99
3.5" craw comes standard with legs. Single Cavity by Kearby Design & Manufacturing LLC Made in USA
Out of stock
Aluminum Fishing Lure Molds
$74.99
4.65" Hog mold Single Cavity
The smaller hog at 4.65" long with our style of flappers for excellent action!
by Kearby Design & Manufacturing LLC
Made in USA
Quality supplier for all Soft Bait Making products.
Bait Plastics offers soft bait supplies for the DIY lure maker. We ship Plastisol, Pigments, Glitters, Scents, and a full range of Plastisol additives.
Out of stock
Aluminum Fishing Lure Molds
$70.00
4" Long bug, excellent action in the water. The body of this bait and nose is thicker to give the bait more durability than similar baits. Single Cavity
Price range: $7.99 through $23.99
High Temp STRING Glitter .125 x .0125
Out of stock
All
$4.99
Color Wheel For mixing different colors. Find your specific color by using this simple color wheel guide.
$210.99
3 Gallons of Plastisol
- Choose Formula
All
Price range: $7.64 through $14.24
Highlight Powder - Add to plastisol to create unique effects and light reflection, Color will vary dramatically with plastic color. Use in clear or colored plastic. Packed by fluid ounces.
- Blue Highlight
- Violet Highlight
- Gold Highlight
- Green Highlight
- Red Highlight
- Copper Highlight
Sale!
Liquid Plastisol
Original price was: $149.99.$144.99Current price is: $144.99.
- 112 Super Soft
- 142 Super Soft/Low Odor/Ultra Clear
- 152 Soft
- 212 Medium
- 232 Medium Non-Phthalate
- 242 Medium/Low Odor/Ultra Clear
- 262 Medium / Saltwater
- 292 medium/hard/low odor/ulra clear
- 312 Saltwater
- 342 Hard/Low Odor/Ultra Clear
- 362 Saltwater Super Tough
Soft Bait Starter Kits
$135.99
Bass Starter kit 2 Gallons of Plastisol Pm212 PM262 Scent Garlic 4 Pigments Choices White Black Green Pumpkin Watermelon 4 Color Choices of .015 Hex High Temp Glitter  Black Red Royal Blue Purple 25 Bait Bags 7×4 1/4
Out of stock
Air Clamp/Vise
$425.00
Recommended air pressure 110 to 140PSI. If possible, use an air inline filter to extend the cylinder life. Always check your compressor for moisture. 6" Base Keep molds centered to get the best out of this clamp. Do not leave plugged in with pressure when not in use. Usage of the clamp can pinch hand, finger or ect. Using this clamp the operator/owner of the clamp takes full responsibility of usage of the device. Clean with compressed air. Do not use chemicals or abrasives. (wd40 safe for cleaning) Do not exceed 140 psi. Servicing. Add very little Tool oil once every month. (About 4 drops is all you need to lube the system.) (Do not use WD40 in the air lines.)
Aluminum Fishing Lure Molds
Epic Bait Molds 3 INCH CURLY TAIL GRUB MOLDS – 2 & 10 CAVITY
Price range: $70.00 through $169.00
This 3 Inch Curly Tail Grub’s body thickness is .36″, the body length from nose to base of tail is 1.05″ and the curly tail is .05″ thick.  The overall length of the bait is 3 inches with the tail extended/hanging. These grubs feature unbeatable tail action and shoot perfect. 2 Cavity Mold Dimensions – 5″x2″ 10 Cavity […]
We love the opportunity to speak with our customers and can be reached
at 800-427-5819 or csr@baitplastics.com
Wanting to learn more about Bait Plastics formulas and making your own soft baits. Click here for helpful tips!Â
Feature Products
Scent
Price range: $9.99 through $177.99
The best scents on the market. Â Add these scents to the finished baits or bag to attract your trophy fish!
- Anise
- Cappuccino
- Crawfish Oil
- Garlic
- Herring
Plastisol Additives
$6.95
4 Ounce Dipping Dye with UV. Instantly change your baits color
- UV Clear
- Green
- Chartreuse
- Orange
- Red
All
Price range: $4.95 through $19.99
Hanging Bait Bags - Laminated 3 x 3 4 x 4 5 x 3 6 x 4 7 x 4.25 8 x 5 9 x 4 12 x 4