Epic Bait Molds 3" NED STINGER MOLD - 8 CAVITY
1 × $135.00 
Epic Bait Molds 6.2 INCH LIZARD MOLD - 4 CAVITY
1 × $185.00 
Epic Bait Molds 3 INCH NED STINGER HAND INJECTION MOLD
1 × $135.00 Subtotal: $455.00
Soft Bait Starter Kits
Crappie Starter Kit 2 Gallons of Plastisol 112 212 Scent Garlic 4 Pigments Choices Flu Pink Monkey Milk Chartreuse Black 4 Color Choices of .015 Hex High Temp Glitter  Holo Gold Holo Silver Black Red 25 Bait Bags 3×3
Soft Bait Starter Kits
Bass Starter kit 2 Gallons of Plastisol Pm212 PM262 Scent Garlic 4 Pigments Choices White Black Green Pumpkin Watermelon 4 Color Choices of .015 Hex High Temp Glitter  Black Red Royal Blue Purple 25 Bait Bags 7×4 1/4
Injectors
Hand Injectors with Locking Pins. 2" diameter injectors 8oz Injector = $155.99 12oz Injector=$169.99 16oz Injector = $175.99 20oz Injector = $185.99 Dual Kit only = $115.99 Dual 8oz Injector = $369.99.99 Dual 12oz injector = $389.99 includes 2 injectors and kit Dual 16oz injector=$409.99 includes 2 injectors and kit Dual 20oz injector=$429.99 includes 2 injectors and kit All injectors Comes with 2 O-Rings
Air Clamp/Vise
-Fully Machined clamp plates to ensure optimized clamping face. -6" wide base with 8" clamping plates to allow for mold stability and greater clamping surface. -Adjustable height for different mold sizes. -Anti Marring plates to help reduce cosmetic wear of mold surfaces. -Adjustable speed controller to optimize cylinder speed to operator preference. -110-140 psi recommended for operation. -Inline filter recommended to extend the life of the cylinders. -Keep molds centered to get optimal clamping pressure. -Remove air pressure from clamp after each use. -Usage of the clamp can pinch hand, finger or ect. Using this clamp the operator/owner of the clamp takes full responsibility of usage of the device. -Clean with compressed air and WD-40 only. -Do not exceed 140 psi. -Lubricate system with 1 drop of pneumatic tool oil per week of use. ***Frequent use may require more frequent lubrication. ***LUBRICATE WITH PNEUMATIC TOOL OIL ONLY***
Aluminum Fishing Lure Molds
Aluminum Fishing Lure Molds
3.5" craw comes standard with legs. Single Cavity by Kearby Design & Manufacturing LLC Made in USA
Aluminum Fishing Lure Molds
Bait Plastics offers soft bait supplies for the DIY lure maker. We ship Plastisol, Pigments, Glitters, Scents, and a full range of Plastisol additives.
High Temp STRING Glitter .125 x .0125
Aluminum Fishing Lure Molds
The 6 Inch Finesse Worm is 6 inches total length with a diameter of .33″ at the thickest part of the body. The bottom of the bait is flat in overall shape but the ribbing on the body goes all the way around the worm. Mold size – 3″x7″ Number of cavities – 5 All molds are […]
1 Gallon of Plastisol
Aluminum Fishing Lure Molds
The 2 Inch Sandworm bait measures 2″ from end to end and the bait’s round/ribbed body section measures .215″ wide x .175″ tall at the thickest part. The tiny projections/legs along the sides of the body are flat on one side, rounded on other and taper to a point. This allows for lots of movement […]
Aluminum Fishing Lure Molds
The Stinger Ned measures 3″ from tip to tail and the thick end of the bait is .45″ thick. The body has a thin angled rib texture and a pointed, pyramid shaped tail. Designed for use with a ned rig style jig heads. Mold size – 7in x 3in Number of cavities – 8 Made in […]
Aluminum Fishing Lure Molds
The 4″ long Slick Swimmer paddle tail swimbait’s body is .6″ thick and .375″ wide. This is a 6 cavity “top shot” mold which allows you to use two injectors and a mixing block (not included) to shoot top/bottom laminated baits.
Aluminum Fishing Lure Molds
The 6.2 Inch Lizard bait has a total length of 6.2 inches with the curly tail extended. The body of this bait is .35″ from back to belly and .46″ from side to side at the widest part. This bait also features curly tail arms that kick at a very slow retrieval rate along with a long […]
Plastisol Additives
The Plastisol made by PolySol and distributed by Bait Plastics typically does not require any additional stabilizer, but this high grade stabilizer will correct any yellowing issues you may see after several reheats.
High Quality, High Strength TIN CURE RTV Silicone
POLYSOL's RTV silicone mold making rubber is a two-component material. Â
There is a Part A and a Part B that is mixed together at a 10/1 ratio
APPLICATIONS:Â -
|
Aluminum Fishing Lure Molds
The 2 Inch Battle Grub measures 2 inches long from tip to tail and the thickest part of the body is .36″ in across. It has a grub shaped body for easy rigging on small jigs, a wide but flat tail that has lots of up/down action and spikes along both sides to add texture and more […]
Injectors
Hand Injectors with Locking Pins. 4oz Injector Series 1 = $105.99 6oz Injector=$115.99 8oz Injector = $125.99 10oz Injector = $135.99 Dual 4oz Injector Kit = $299.99 includes 2 Injectors and kit Dual 6oz injector = $310.99 includes 2 injectors and kit Dual 8oz injector=$329.99 includes 2 injectors and kit Dual 10oz injector=$349.99 includes 2 injectors and kit Dual Injector Kit= $115.99 only the kit Triple 4oz Injector Kit = $409.99 includes 3 Injectors and kit Triple 6oz Injector=$429.99 includes 3injectors and kit Triple 8oz Injector=$449.99 includes 3injectors and kit Triple 10oz Injector=$469.99 includes 3injectors and kit Triple Injector Kit = $115.99 only the kit All injectors Comes with 2 O-Rings
Scent
The best scents on the market. Â Add these scents to the finished baits or bag to attract your trophy fish!
Plastisol Additives
4 Ounce Dipping Dye with UV. Instantly change your baits color
All
Hanging Bait Bags - Laminated 3 x 3 4 x 4 5 x 3 6 x 4 7 x 4.25 8 x 5 9 x 4 12 x 4
