Skip to content
Bait PlasticsBait Plastics
  • Liquid Plastisol
    • The Plastisol Sampler
      • BAIT PLASTICS PREMIUM PLASTISOL – 1 GALLON
        • BAIT PLASTICS PREMIUM – 5 Gallon Mix/Match
          • BAIT PLASTICS PREMIUM PLASTISOL – 5 GALLONS
  • Flex X 200
    • Flex X 200 Sample
  • Plastisol Additives
    • Plastisol Softener
      • Plastisol Hardener
      • Worm Oil
        • Heat Stabilizer
          • UV Dipping Dye
          • Fine Salt
            • Floating Additive
              • Sinking Additive
              • Mend It Lure Glue
                • Color Wheel
  • Liquid Pigments
    • Premium Pigments
  • Powder Pigments
    • Highlights
    • Glow Powders
    • Pearls
    • Color Shifting Powder
      • UV Powder
    • Fluorescent Powders
  • Glitter
    • .025 FlO Hex Glitter
    • String High Temp Glitter
      • .015 High Temp Glitter
      • .040 High Temp Glitter
      • .062 High Temp Glitter
  • Scents
  • 3D Eyes
  • Bait Bags
  • De-Gassing Chamber
  • RTV Molding Silicone
  • Liquid Mixers
  • N2 Injectors
    • Injector #2
  • Soft Bait Starter Kits
    • The Rookie – Starter Kit
      • The Veteran – Starter Kit
        • The Champion – Starter Kit
  • Safety Products
    • Half Mask Respirator
      • Gas / Organic Vapors Cartidges
        • Hot Mill Gloves
          • Thermometer
            • Pyrex Microwave Cup
              • Pail Opener
  • Helpful Tips!
  • Aluminum Fishing Lure Molds
    • Stick / Worm Molds
    • Craw / Creature Molds
    • Swimbait Molds
    • Grub Molds
      • Crappie / Panfish Molds
        • Jerk Bait Molds
  • FREE SHIPPING OVER $39.95
  • Accessories
    • Keychain Bottle Opener
      • Bait Plastics Tank
        • Bait Plastics T-Shirt
  • Mixing Melting Pot
  • Air Clamps/Vise
  • Gift Card
  • Cart / $0.00
    • No products in the cart.

  • Cart

    No products in the cart.

Add to Wishlist
Awaiting product image
Home / All

Helpful Tips!

Category: All
  • Description

Thank your for your purchase from Bait Plastics.

Below are some instructions and helpful tips.

Lure Plastisol Formulations – Bait Plastics offers the below formulations for you exact needs.

  • 112 Super Soft – This formula is great for drop shot and finesse baits. This is our softest formula and guarantees great action in the water.
  • 152 Soft – This formula is in between our super Soft and Medium formula.  It also will provide great action and flexibility in the water.
  • 212 Medium – This formula is our most popular and a wide range of soft baits can be made with the 212 Medium.
  • 262 Medium / Saltwater – This formula is our second most popular and is great for senkos, frogs, and all other soft baits.
  • 312 Saltwater – This formula is specifically made for saltwater and crappie baits.  It provides a tough bait that can stand up to the bite.
  • 362 Super Tough – This formula is great for Saltwater, Muskie, Large Swimbaits, & Crappie.  This is Super Tough!
  • Non PHAHATLATE – We supply non-phthalate formulas in Soft, Medium, & Saltwater.

Flex X 200.

1.) Not intended for microwave use.

2.)Best processed using a convection pan, presto pot with stirrer, shooting star, or stainless steel beaker and a hot plate. Hot Runner presto pots with stirrers are available on www.baitplastics.com

3.)Take the desired amount of material, place into heating vessel.

4.) Set temperature to 400F. If using a mixing pot, allow material to heat and mix until water clear and free of bubbles.

5.)If not using a mixing heating pot or pan, allow to begin melting, then keep stirring to prevent burning or over heating. Mix until water clear and bubble free.

6.) Works with all standard injectors and molds.

7.) Remelting: upon cooling, this material will act closely to a normal plastic lure, but will remelt at a much lower temperature. Hot melt stage can be achieved as low as 280F – 300F.

8.) Precautions: do not use a microwave. Do not allow baits to come into contact with traditional plastic lures as they are incompatible and will bond to each other. Water cooling of molded lures is a great way to allow them to cool and cure. After cooling, extra worm oil is recommended during bagging to prevent lures from sticking together and distorting their appearance. Rolling cured baits in salt helps as well. Special care should be taken to not leave these baits in direct sunlight or in hot boat compartments or tackle boxes. Used lures can be remelted, so keep them and make new lures. Best results are achieved by pre heating your injector and molds. This material cools quicker than standard plastic.

Safety

  • The plastisol being used must be heated to 325 degrees.  Spilling or splashing hot plastisol can cause serious burns.
  • Always wear an approved respirator and safety goggles when heating plastisol.  Wear gloves, closed toe shoes and a long sleeve shirt and pants to protect against burns and splatters.
  • Work in well ventilated areas.  Heated plastisol off gasses so adequate ventilation is a must.
  • Never let other liquids come into contact with hot plastisol.
  • If the plastisol accidentally burn please evacuate the area until all the smoke and fumes have dissipated.

Preparing Plastisol

  • Plastisol is a milky white liquid that when heated to correct temperatures will turn clear and into a syrup type consistency.
  • MIXING before each use is very important.  We recommend using a paddle type mixer and mixing for 2-4 minutes before each use.  Be sure to mix the bottom of the container thoroughly.  Mix slowly and gently not to cause bubbles, Never shake or mix vigorously plastisol as it will cause micro bubbles.

Heating Plastisol

  • We recommend using a melting pot with a slow mixer for best results.  Melting pots insure the plastisol is heated evenly and reduces the chances of burning the plastisol.
  • Microwave Heating {Pyrex Cup}
  • Fill the Pyrex cup 4-8 ounces.
  • Heat the plastisol for 1 minute and then gently stir.
  • Heat an additional 30 seconds and repeat this process until the plastisol becomes clear and is in a syrup consistency.  Normally the max heating is between 1:30 to 2 minutes.
  • Once the plastisol is clear we recommend adding glitter, coloring, salt or approved scents into your heat d plastisol.  You can then slowly mix the ingredients together.
  • Bubbles:  The best way to prevent bubbles is by gentle stirring.  Shaking or mixing at high speeds creates air bubbles. TIP – Heat the plastisol so that it gets into melt stage,  let the plastisol cool for about 5 minutes and then reheat it back into melt stage.  Majority of time this will eliminate most bubbles.

Storing Plastisol

  • Plastisol should be stored in a controlled environment and from 50-90 degrees.
  • It is very important to keep unused plastisol sealed between uses.  If moisture contaminates the plastisol it will cause bubbles.
  • Plastisol will seperate over time so it is important to thoroughly mix the plastisol before every use.  Plastisol that has set for a long period of time will need additional mixing time before use.

 

Related products

Add to Wishlist
Quick View

All

3D Eyes

$11.99

3D Eyes - 100 PACK Adhesive Backed

  • Red
  • Gold
  • Silver

Select options
Add to Wishlist
Quick View

All

.040 High Temp Glitter

$7.99 – $23.99

High Temp Polyester Glitter .040 HEX

Select options
Add to Wishlist
Quick View

All

The Rookie – Starter Kit

$92.99

1 Gallon of  Plastisol

  • Choose Formula
Scent 3 Pigments Choices  {4 Ounces Each} 3 Color Choices of .040 Hex High Temp Glitter  {4 Ounces Each} 25 Bait Bags {Pick Size}

Select options
Add to Wishlist
Quick View

All

Highlights

$7.64 – $14.24

Highlight Powder - Add to plastisol to create unique effects and light reflection, Color will vary dramatically with plastic color. Use in clear or colored plastic. Packed by fluid ounces.

  • Blue Highlight
  • Violet Highlight
  • Gold Highlight
  • Green Highlight
  • Red Highlight
  • Copper Highlight

Select options
Add to Wishlist
Quick View
Out of stock

All

De-Gassing Chamber

$194.99

Package Includes: 3 Gallon Vacuum Chamber 3/4" Acrylic Lid Heat Treated Silicone Lid Gasket Glycerin Filled Gauge with Brass Fittings 50 Micron Air Filter Non-Stick Silicone Pad Foot Steel Wire Collapse-Proof Hose 3 CFM Single Stage Vacuum Pump  Vacuum Pump Oil Instruction Manual

Read more
Add to Wishlist
Quick View

All

.015 High Temp Glitter

$7.99 – $23.99

High Temp Polyester Glitter .015 HEX  

Select options
Add to Wishlist
Quick View

All

.062 High Temp Glitter

$7.99 – $23.99

High Temp Polyester .062 HEX Glitter

Select options
Add to Wishlist
Quick View

All

String High Temp Glitter

$7.99 – $23.99

High Temp STRING Glitter .125 x .0125

Select options
Copyright 2023 © Site Name. All Right Reserved Proudly Created By INNOX_SOLUTION
  • Liquid Plastisol
    • The Plastisol Sampler
      • BAIT PLASTICS PREMIUM PLASTISOL – 1 GALLON
        • BAIT PLASTICS PREMIUM – 5 Gallon Mix/Match
          • BAIT PLASTICS PREMIUM PLASTISOL – 5 GALLONS
  • Flex X 200
    • Flex X 200 Sample
  • Plastisol Additives
    • Plastisol Softener
      • Plastisol Hardener
      • Worm Oil
        • Heat Stabilizer
          • UV Dipping Dye
          • Fine Salt
            • Floating Additive
              • Sinking Additive
              • Mend It Lure Glue
                • Color Wheel
  • Liquid Pigments
    • Premium Pigments
  • Powder Pigments
    • Highlights
    • Glow Powders
    • Pearls
    • Color Shifting Powder
      • UV Powder
    • Fluorescent Powders
  • Glitter
    • .025 FlO Hex Glitter
    • String High Temp Glitter
      • .015 High Temp Glitter
      • .040 High Temp Glitter
      • .062 High Temp Glitter
  • Scents
  • 3D Eyes
  • Bait Bags
  • De-Gassing Chamber
  • RTV Molding Silicone
  • Liquid Mixers
  • N2 Injectors
    • Injector #2
  • Soft Bait Starter Kits
    • The Rookie – Starter Kit
      • The Veteran – Starter Kit
        • The Champion – Starter Kit
  • Safety Products
    • Half Mask Respirator
      • Gas / Organic Vapors Cartidges
        • Hot Mill Gloves
          • Thermometer
            • Pyrex Microwave Cup
              • Pail Opener
  • Helpful Tips!
  • Aluminum Fishing Lure Molds
    • Stick / Worm Molds
    • Craw / Creature Molds
    • Swimbait Molds
    • Grub Molds
      • Crappie / Panfish Molds
        • Jerk Bait Molds
  • FREE SHIPPING OVER $39.95
  • Accessories
    • Keychain Bottle Opener
      • Bait Plastics Tank
        • Bait Plastics T-Shirt
  • Mixing Melting Pot
  • Air Clamps/Vise
  • Gift Card
  • Buy now

FREE SHIPPING on ORDERS OVER $39.95 Dismiss

Login with Facebook

Login

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.